ESI-687 Low Current Probe
In stock
ESI-687 Low Current Probe has the capability of measuring down to 1 milliamp (.001A), the #687 is a great tool for all low current applications. Especially for diagnosing parasitic drains! Clamp opening is large enough to fit over most negative battery cables. Applications: fuel injectors, fuel pumps, electric motors, battery drains, charging systems.
$253.95
ESI-687 Low Current Probe
Features & Benefits
ESI-687 Low Current Probe has the capability of measuring down to 1 milliamp (.001A), the #687 is a great tool for all low current applications. Especially for diagnosing parasitic drains! Clamp opening is large enough to fit over most negative battery cables. Applications: fuel injectors, fuel pumps, electric motors, battery drains, charging systems.Watch video here.
Ideal for use with PicoScope 4 Channel Scope
Features:
- 35 Test Ranges
- 10 Test Functions
- Auto Power Off
- Auto-Ranging
- Data Hold
- Continuity Beep
- Overload Protection
- Clamp opening 1/2 inch
- 9 Volt Battery Included
- Carrying Case included
TEST RANGES:
- DC Amps: 0-4A, 80A
- AC Amps: 0-4A, 80A
- DC Volts: 0-400mV, 4V, 40V, 400V, 600V
- AC Volts: 0-400mV, 4V, 40V, 400V, 600V
- Ohms: 0-400, 4k, 40k, 400k, 4M, 40M
- Frequency: 0-5Hz, 50Hz, 500Hz, 5kHz, 50kHz, 500kHz, 5MHz, 10MHz
- Capacitance: 0-40nF, 400nF, 4uF, 40uF, 100uF
- Duty Cycle: 0-.5%-99.0%
- Diode: Diode Test
- Continuity: Audible Beep
Up-Sells
PICO 2 Channel Scope (Currently Unavailable)
$1,397.97
PICO 2 Channel Scope (Currently Unavailable)
$1,397.97
$1,397.97Add to cart
PICO 2 Channel Scope (Currently Unavailable)
New PicoScope 4425A for active diagnostics
Our exciting new PicoBNC+® probe connectivity, unique to PicoScope 4225A and 4425A oscilloscopes, provides you with:
- Channel status lights to show you which probes and channels to connect and their status when you load a data file or guided test
- Smart probe interfacing so that all your probe configuration takes place in the software – no more incorrect probe switch positions!
- Powered probes that are always on and ready to go – no more flat batteries, current clamp zeroing, or auto-off!
- Future-proofing of your diagnostic capabilities as we develop new probe technologies.
- Full backwards-compatibility with BNCÂ for all your existing PicoScope or third-party probes
Pico 4 Channel Starter Kit w/Box #PP921
$2,391.87
Pico 4 Channel Starter Kit w/Box #PP921
$2,391.87
$2,391.87Add to cart
Pico 4 Channel Starter Kit w/Box #PP921
Scan tool or scope?
We are often asked “Should I buy a scan tool or a scope”. The short answer is that you need both. A scan tool can often point you in the right direction, perhaps indicating a misfire on a specific cylinder but too often the less experienced technician then ends replacing several parts before the problem is solved. Oscilloscopes should be used:
- To eliminate guesswork and test individual components before they are replaced. This avoids “parts darts” where more and more parts are replaced until the fault goes away.
- To find intermittent wiring and connector faults.
- When a vehicle has a problem but no code has been set or when multiple / misleading codes have been set
- As the best way to find charging and starting problems.
- To find problems with actuators such as motors and injectors that are not monitored by the ECU.
- To identify mechanical problems such as compression and slipped / incorrectly fitted timing belts.
For the technician oscilloscopes lead to faster, more efficient diagnostics and a better understanding of how vehicle systems work. For the workshop using a PicoScope encourages a “fix it right” culture by reducing the number of parts changed on guesswork. The net result is improved customer satisfaction, increased repeat business and increased profits.
Pico 2 Channel Standard Kit #PQ177
$3,661.62
Pico 2 Channel Standard Kit #PQ177
$3,661.62
$3,661.62Add to cart
Pico 2 Channel Standard Kit #PQ177
PicoScope 4425A for active diagnostics
Our exciting PicoBNC+® probe connectivity, unique to PicoScope 4225A and 4425A oscilloscopes, provides you with:
- Smart probe interfacing so that all your probe configuration takes place in the software – no more incorrect probe switch positions!
- Powered probes that are always on and ready to go – no more flat batteries, current clamp zeroing, or auto-off!
- Channel status lights to show you which probes and channels to connect and their status when you load a data file or guided test
- Future-proofing of your diagnostic capabilities as we develop new probe technologies.
- Full backwards-compatibility with BNCÂ for all your existing PicoScope or third-party probes
All our automotive PicoScopes have the features that have already helped technicians around the world with vehicle diagnostics:
- 400 M samples/second and 20 MHz bandwidth to make sure you can test the latest vehicles such as those with high-speed FlexRay or CAN-FD networks
- 12-bit (16-bit enhanced) resolution – your waveforms in high definition
- 250 M sample memory for long-duration captures; ideal when you are trying to diagnose intermittent faults
- USB 3.0 data transfer speeds and power, providing you with high performance and portability
Pico 4 Channel Advanced Kit PQ180 (Currently Unavailable)
$5,048.17
Pico 4 Channel Advanced Kit PQ180 (Currently Unavailable)
$5,048.17
$5,048.17Add to cart
Pico 4 Channel Advanced Kit PQ180 (Currently Unavailable)
New PicoScope 4425A for active diagnostics
Our exciting new PicoBNC+® probe connectivity, unique to PicoScope 4225A and 4425A oscilloscopes, provides you with:
- Channel status lights to show you which probes and channels to connect and their status when you load a data file or guided test
- Smart probe interfacing so that all your probe configuration takes place in the software – no more incorrect probe switch positions!
- Powered probes that are always on and ready to go – no more flat batteries, current clamp zeroing, or auto-off!
- Future-proofing of your diagnostic capabilities as we develop new probe technologies.
- Full backwards-compatibility with BNCÂ for all your existing PicoScope or third-party probes
All our automotive PicoScopes have the features that have already helped technicians around the world with vehicle diagnostics:
- 400 M samples/second and 20 MHz bandwidth to make sure you can test the latest vehicles such as those with high-speed FlexRay or CAN-FD networks
- 12-bit (16-bit enhanced) resolution – your waveforms in high definition
- 250 M sample memory for long-duration captures; ideal when you are trying to diagnose intermittent faults
- USB 3.0 data transfer speeds and power, providing you with high performance and portability
Autel AUL-MS919
Features & Benefits
The MaxiSys MS919 features a 9.7-inch touchscreen tablet with Android 7.0 OS powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), substantial 128GB built-in memory to provide diagnostic guidance and test components to confirm repairs. The new MaxiFlash VCMI, functions as a 4-channel oscilloscope, waveform generator, multimeter, and CAN BUS tester. The supporting MS919 software provides a large library of preset guided tests and extensive waveform library, to ensure techs are getting the most Oscilloscope use. The MS919 software outperforms competitors by offering DTC and sensor specific test options to help test more accurately, as well as providing probe and component location diagrams so technicians test while connected correctly.
- Autel updates provide latest OE level coverage for more than 80 US Domestic, Asian and European vehicles, including supercar
- Exceptional OE-Level functionality from comprehensive OBDII diagnostics & services to advanced ECU coding and programming
- Automatic system and software updates with real-time push message notifications via internet
- Interactive Data Logging sessions enable direct contact with Autel Support
- for first-hand troubleshooting of diagnostic bugs and error
- One-stop multitasking designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized
- Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
Warranty Information
1-Year
PICO Scope 4 channel starter kit (Currently Unavailable)
$2,837.10
PICO Scope 4 channel starter kit (Currently Unavailable)
$2,837.10
$2,837.10Add to cart
PICO Scope 4 channel starter kit (Currently Unavailable)
New PicoScope 4425A for active diagnostics
Our exciting new PicoBNC+® probe connectivity, unique to PicoScope 4225A and 4425A oscilloscopes, provides you with:
- Channel status lights to show you which probes and channels to connect and their status when you load a data file or guided test
- Smart probe interfacing so that all your probe configuration takes place in the software – no more incorrect probe switch positions!
- Powered probes that are always on and ready to go – no more flat batteries, current clamp zeroing, or auto-off!
- Future-proofing of your diagnostic capabilities as we develop new probe technologies.
- Full backwards-compatibility with BNCÂ for all your existing PicoScope or third-party probes
All our automotive PicoScopes have the features that have already helped technicians around the world with vehicle diagnostics:
- 400 M samples/second and 20 MHz bandwidth to make sure you can test the latest vehicles such as those with high-speed FlexRay or CAN-FD networks
- 12-bit (16-bit enhanced) resolution – your waveforms in high definition
- 250 M sample memory for long-duration captures; ideal when you are trying to diagnose intermittent faults
- USB 3.0 data transfer speeds and power, providing you with high performance and portability
Autel AUL-MSULTRA
The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence. It features a 13-inch touchscreen tablet with Android 7.0 OS powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), substantial 256GB built-in memory, all powering the new split-screen multi-application navigation to provide diagnostic guidance and test components to confirm repairs. Combined with the dynamic topology module mapping, enhanced AutoSCAN features and Intelligent Diagnostics options, the Ultra offers the technicians step-by-step repair guidance. The new MaxiFlash VCMI functions as a 4-channel oscilloscope, waveform generator, multimeter, and CAN BUS tester. The convenient docking station featured ensures you always have the power to scan.
PicoScope 4 Channel Standard Kit 4425A PQ178
$5,054.22
PicoScope 4 Channel Standard Kit 4425A PQ178
$5,054.22
$5,054.22Add to cart
PicoScope 4 Channel Standard Kit 4425A PQ178
Automotive oscilloscopes
A PicoScope (sometimes known as a labscope) turns your laptop or desktop PC into a powerful diagnostic tool. Think of it as the X-ray machine of diagnostics, letting you see the changing signals inside wires. You can purchase a PicoScope on its own, but most people purchase one of our award-winning Automotive Diagnostics Kits. These money-saving kits contain everything you need – just add a PC.
Related Products
Power Probe III Master Combo Kit #PPKit03S
$487.75
Power Probe III Master Combo Kit #PPKit03S
$487.75
$487.75Add to cart
Power Probe III Master Combo Kit #PPKit03S
Power Probe III Master Combo Kit #PPKit03 The Master Combo Kit includes: #PPLSO1 Complete lead set #ECT2000 Electronic Circuit Tester Kit ($180
ESI-698 1000amp Current Probe
$177.65
ESI-698 1000amp Current Probe
$177.65
$177.65Add to cart
ESI-698 1000amp Current Probe
ESI-698 1000amp Current Probe is designed for use with digital multimeters,lab scopes or graphing meters. With 1000 Amp capabiltiy, this instrument can be used to test starting and charging systems. It can even be used to test relative compression when used with your lab scope or graphing meter
Piercing Probes Set of 5
Each piercer is just over 5-1/2 inches long and is designed to make test connections to wires of varying sizes (.050 to .150 diam).
The pointed tip allows separation of dense wire groups and easy connection.
The point is retracted by a syringe-type operation
No more “pulling back” on the handle to penetrate insulation.
The unit is molded in durable nylon, impervious to cleaning solvents and most fuels.
Set includes one probe of each color: Red, Blue, Yellow, Green, Black.
Screw Type Piercing Probes
Rotate the red or black jack to move the piercing needle forward into the insulation.
Rotating jack will not twist test lead while the needle is being screwed into wire.
* Can handle wires from 0.030″ diameter through 0.180″ diameter insulation.
* Overall length = 4-inches
* High visibility bright yellow body.
* Spring loaded slider holds wire centered for piercing needle.
* Mates with any banana plug test leads including the AES ST3 Test Leads.
* Mates with pin tip probe test leads. (see images below)
* Materials consist of a Nylon body, hardened steel needle, brass socket.
* Operating Voltage: 30VAC or 60V DC Max.
* Current: 1 Ampere Max.
Set includes two probes: one red, one black.
These Probes will connect to test leads that terminate to Shrouded, Standard and Retractable banana plugs.
