ESI# 143 AutomotiveTest Lead Kit includes our basic set of interchangeable specialty test probes designed for automotive use.
The flexible back probing pins are great for sliding into automotive connectors like those on fuel injectors and MAP sensors. The large Crocodile Clips are good for clipping to grounds and battery terminals. Roll up storage pouch keeps your leads organized.
ESI 143 Automotive Test Lead Kit Includes:
- One set of Interconnect Leads – length 64 inches
- Test Probes
- Flexible Silicon Back Probe Pins
- Shielded Alligator Clips
- Large Crocodile Clips
- Deluxe Storage Pouch
- Roll up storage pouch
| Weight | 1 kg |
|---|---|
| Dimensions | 23 × 18 × 5 cm |
Related Products
6Way Breakout Lead Set
The breakout leads are available with 4 different sizes of connectors: 0.6 mm, 1.5 mm, 2.3 mm and 2.8 mm.
They allow an oscilloscope to to connect to variety of components in the engine compartment, without having to strip or pierce any insulation and with no risk of damage to connectors. Each lead has 6 blades wired to 6 sockets, allowing you to insert it between a plug and socket pair, other ends are 6 “banana” (4 mm) sockets.
With these 6-way leads, you will be able to test most of the sensors and actuators on all makes and models of vehicle, including MAP, temperature, throttle position and airflow sensors, fuel pumps, primary ignition circuits and fuel injectors.
Coil On Plug Inductive Signal Probe
$366.18
Coil On Plug Inductive Signal Probe
$366.18
$366.18Add to cart
Coil On Plug Inductive Signal Probe
Coil On Plug (COP) and Signal Probe
The TA204 COP and signal probe from Pico Technology is the easiest and fastest non-intrusive way to check coil-on-plug ignition coils and spark plugs.
- Find misfires fast
- Displays scope patterns of the secondary, faster than scoping the primary
- Works on all automotive scopes capable of displaying ignition patterns
- Can also be used to investigate injectors and other inductive actuators
- Flexible design allows for easier access to hard-to-reach components
- No batteries required
Like distributors, spark plug wires are starting to disappear from cars. With the new COP ignition systems the ignition coils are connected directly to the spark plugs — eliminating the need for the spark plug wires. With no high-voltage spark wires, a COP probe is required to be able to pick up the secondary ignition waveform.
As standard the TA204 COP probe is supplied as a kit (PP357) complete with the TA033 BNC to BNC cable in order to connect to your automotive
How does it work?
The coil–on–plug and signal probe works with most COP systems; it requires no special adaptors, no foil strips, and no batteries. The Pico coil-on-plug and signal probe eliminates the need for back-probing: to use the probe simply press the probe against the coil.
Along with testing COP systems, the coil-on-plug and signal probe can also be used to obtain many other signals, including a secondary ignition waveform on conventional ignition systems.
Designed to save you time, effort and money, the coil-on-plug and signal probe is the fastest way to test both conventional coil-on-plug secondary ignition systems.
EsiTest #180 LOADpro Dynamic Test Leads
$123.45
EsiTest #180 LOADpro Dynamic Test Leads
$123.45
$123.45Add to cart
EsiTest #180 LOADpro Dynamic Test Leads
LOADpro finds these problems FAST: High Corrosive Resistance Shorts to Ground Open Circuits LOADpro Test Leads load the circuit to see if
