Screw Type Piercing Probes
In stock
Rotate the red or black jack to move the piercing needle forward into the insulation.
Rotating jack will not twist test lead while the needle is being screwed into wire.
* Can handle wires from 0.030″ diameter through 0.180″ diameter insulation.
* Overall length = 4-inches
* High visibility bright yellow body.
* Spring loaded slider holds wire centered for piercing needle.
* Mates with any banana plug test leads including the AES ST3 Test Leads.
* Mates with pin tip probe test leads. (see images below)
* Materials consist of a Nylon body, hardened steel needle, brass socket.
* Operating Voltage: 30VAC or 60V DC Max.
* Current: 1 Ampere Max.
Set includes two probes: one red, one black.
These Probes will connect to test leads that terminate to Shrouded, Standard and Retractable banana plugs.
$96.25
Screw Type Piercing Probes rotate the red or black jack to move the piercing needle forward into the insulation.
Rotating jack will not twist test lead while the needle is being screwed into wire.
* Can handle wires from 0.030″ diameter through 0.180″ diameter insulation.
* Overall length = 4-inches
* High visibility bright yellow body.
* Spring loaded slider holds wire centered for piercing needle.
* Mates with any banana plug test leads including the AES ST3 Test Leads.
* Mates with pin tip probe test leads. (see images below)
* Materials consist of a Nylon body, hardened steel needle, brass socket.
* Operating Voltage: 30VAC or 60V DC Max.
* Current: 1 Ampere Max.
Screw Type Piercing Probes set includes two probes: one red, one black.
These Probes will connect to test leads that terminate to Shrouded, Standard and Retractable banana plugs.
Related Products
Test Lead Set of 4 for Snap On Scopes
$196.19
Test Lead Set of 4 for Snap On Scopes
$196.19
$196.19Add to cart
Test Lead Set of 4 for Snap On Scopes
Snap On Lab Scopes are great tools but their lab scope test leads are too short for test drives. Plus, when using multiple channels, ground stacking becomes a problem. The ST3 Test Lead Kit for Snap-on VERUS solves these problems.
ST05 Oxygen Sensor Tester/Simulator
$205.00
ST05 Oxygen Sensor Tester/Simulator
$205.00
$205.00Add to cart
ST05 Oxygen Sensor Tester/Simulator
The ST05 Oxygen Sensor Tester/Simulator provides a simple interface for testing and diagnostics on any Oxygen Sensor, to quickly determine whether the sensor is defective and needs replacement.
U-Scope Basic Kit with Test Leads
$366.58
U-Scope Basic Kit with Test Leads
$366.58
$366.58Add to cart
U-Scope Basic Kit with Test Leads
The uScope: Small enough to fit in your pocket and powerful enough to capture the fastest signals, in less than 4 seconds it’s booted up and ready to take aim on any signal.
The uScope is equipped with a 12-bit analog/digital converter, samples at 1 million/second and includes 10x peak detect oversample.
Piercing Probes Set of 5
Each piercer is just over 5-1/2 inches long and is designed to make test connections to wires of varying sizes (.050 to .150 diam).
The pointed tip allows separation of dense wire groups and easy connection.
The point is retracted by a syringe-type operation
No more “pulling back” on the handle to penetrate insulation.
The unit is molded in durable nylon, impervious to cleaning solvents and most fuels.
Set includes one probe of each color: Red, Blue, Yellow, Green, Black.
6Way Breakout Lead Set
The breakout leads are available with 4 different sizes of connectors: 0.6 mm, 1.5 mm, 2.3 mm and 2.8 mm.
They allow an oscilloscope to to connect to variety of components in the engine compartment, without having to strip or pierce any insulation and with no risk of damage to connectors. Each lead has 6 blades wired to 6 sockets, allowing you to insert it between a plug and socket pair, other ends are 6 “banana” (4 mm) sockets.
With these 6-way leads, you will be able to test most of the sensors and actuators on all makes and models of vehicle, including MAP, temperature, throttle position and airflow sensors, fuel pumps, primary ignition circuits and fuel injectors.
Advanced Terminal Leads Kit
This uTest Advanced Terminal Test Kit is the perfect companion for your lab scope and meter.
Includes Fuse Amp Loops with large loops and flexible wire for ease of connection and placement.
It includes 118 essential and common adapters, probes, and terminals that connect to a wide variety of sensors, actuators and circuits. Use with your lab scope or DMM. Use for terminal drag testing too.
A soft-sided carrying case keeps everything organized.
Specifications for variable resistor in kit: 10KΩ
