Coil-on-Plug extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on Coil-on-Plug ignition systems.
Coil-on-Plug extension leads are designed to aid diagnostics on secondary ignition circuits by allowing an HT measurement to be made when there is no, or limited, access to any spark plug leads. The leads are specifically designed for use with the PP178 Secondary Ignition Pickup.
COP extension leads are easy to use: simply fit them between the coil pack and the plugs, place a capacitive secondary ignition pickup on each lead, and your oscilloscope will show accurate ignition waveforms with correct kV measurements.
Coil-on-Plug extension leads are designed for use with PicoScope automotive oscilloscopes, but can also be used on all other labscopes that are capable of displaying ignition patterns.
Price is for four (4) Pico Coil-On-Plug Extension Leads.
| Weight | 3 kg |
|---|---|
| Dimensions | 38 × 28 × 11 cm |
Related Products
Decade Resistance Box
EXTECH
Features
- Seven decade ranges of resistance
- Values can be set in 1Ω increments
- Case may be grounded separately
- Three binding posts permit isolated substitutions
- Can be substituted into a circuit and function in the place of any component with a standard value
- Can be used to identify the best value for circuit operation then read that value from the switches
Long Piercing Probes
Pierces 24ga to 18ga wire.
Connects to test leads with both female banana sockets and male banana plugs.
Extender adds 1-1/4″ to the length of the probe.
Specifications
* Overall Length: 7-1/2″
* Overall Length with extender: 9-1/4″
* Material: Glass filled nylon
* Needle: High conductivity, gold plated brass (will not arc like stainless steel)
* Piercing Probe rated at 20 amps
Contents
* Piercing probe (7-1/2″ long)
* Extender (2-1/2″ long)
Advanced Terminal Leads Kit
This uTest Advanced Terminal Test Kit is the perfect companion for your lab scope and meter.
Includes Fuse Amp Loops with large loops and flexible wire for ease of connection and placement.
It includes 118 essential and common adapters, probes, and terminals that connect to a wide variety of sensors, actuators and circuits. Use with your lab scope or DMM. Use for terminal drag testing too.
A soft-sided carrying case keeps everything organized.
Specifications for variable resistor in kit: 10KΩ
AES Wave Breakout Box
We call it the AES LineSpi SMART BOB.
The AES LineSpi SMART BOB is a pass-through breakout box for the OBDII DLC (diagnostic link connector).
It’s a DLC magnifier: makes the DLC 5-times larger.
It’s a DLC extender: puts the DLC where you need it.
It’s a spy: exposes the activity on each OBD-II dedicated dataline.
Yes, you still have to locate the vehicle’s DLC and attach the LineSPI SMART BOB but after that everything is so much easier:
9ft. Shielded Lead Set
$143.99
9ft. Shielded Lead Set
$143.99
$143.99Select options This product has multiple variants. The options may be chosen on the product page
9ft. Shielded Lead Set
ST3 Test Leads are designed to withstand automotive environments:
– Shielded from tip-to-tip for maximum noise immunity
– Heat resistant
– Flexible
– Small enough to easily pass under hoods and through windows for road testing.
Each lead is constructed using quality shielded cable and connectors. They are insulation and resistance tested to ensure that they are of the highest possible quality. Each test lead features high quality BNC connectors or banana-plugs. The test end features shrouded banana plugs that allow the use of a wide variety of probes such as pin tips, alligators, back-pin probes, piercing probes and more.
EsiTest #180 LOADpro Dynamic Test Leads
$123.45
EsiTest #180 LOADpro Dynamic Test Leads
$123.45
$123.45Add to cart
EsiTest #180 LOADpro Dynamic Test Leads
LOADpro finds these problems FAST: High Corrosive Resistance Shorts to Ground Open Circuits LOADpro Test Leads load the circuit to see if
