6Way Breakout Lead Set
In stock
The breakout leads are available with 4 different sizes of connectors: 0.6 mm, 1.5 mm, 2.3 mm and 2.8 mm.
They allow an oscilloscope to to connect to variety of components in the engine compartment, without having to strip or pierce any insulation and with no risk of damage to connectors. Each lead has 6 blades wired to 6 sockets, allowing you to insert it between a plug and socket pair, other ends are 6 “banana” (4 mm) sockets.
With these 6-way leads, you will be able to test most of the sensors and actuators on all makes and models of vehicle, including MAP, temperature, throttle position and airflow sensors, fuel pumps, primary ignition circuits and fuel injectors.
$272.02
6Way Breakout Lead Set comes with 4 different sizes of connectors: 0.6 mm, 1.5 mm, 2.3 mm and 2.8 mm.
6Way Breakout Lead Set allows an oscilloscope to to connect to variety of components in the engine compartment, without having to strip or pierce any insulation and with no risk of damage to connectors. Each lead has 6 blades wired to 6 sockets, allowing you to insert it between a plug and socket pair, other ends are 6 “banana” (4 mm) sockets.
With these 6-way leads, you will be able to test most of the sensors and actuators on all makes and models of vehicle, including MAP, temperature, throttle position and airflow sensors, fuel pumps, primary ignition circuits and fuel injectors.
| Weight | 1 kg |
|---|---|
| Dimensions | 8 × 4 × 3 cm |
Related Products
COP Secondary Paddle Probe
Easily scope COP and DIS ignition systems using the AES COP Secondary Paddle Lead (Capacitive).
This rugged 10-foot long, capacitive secondary lead includes a flexible yet sensitive ‘paddle’ that picks up the secondary signal from any COP system on the road today. The thin ‘paddle’ gets into tight spots that no bulky probe can.
Screw Type Piercing Probes
Rotate the red or black jack to move the piercing needle forward into the insulation.
Rotating jack will not twist test lead while the needle is being screwed into wire.
* Can handle wires from 0.030″ diameter through 0.180″ diameter insulation.
* Overall length = 4-inches
* High visibility bright yellow body.
* Spring loaded slider holds wire centered for piercing needle.
* Mates with any banana plug test leads including the AES ST3 Test Leads.
* Mates with pin tip probe test leads. (see images below)
* Materials consist of a Nylon body, hardened steel needle, brass socket.
* Operating Voltage: 30VAC or 60V DC Max.
* Current: 1 Ampere Max.
Set includes two probes: one red, one black.
These Probes will connect to test leads that terminate to Shrouded, Standard and Retractable banana plugs.
Decade Resistance Box
EXTECH
Features
- Seven decade ranges of resistance
- Values can be set in 1Ω increments
- Case may be grounded separately
- Three binding posts permit isolated substitutions
- Can be substituted into a circuit and function in the place of any component with a standard value
- Can be used to identify the best value for circuit operation then read that value from the switches
EsiTest #180 LOADpro Dynamic Test Leads
$123.45
EsiTest #180 LOADpro Dynamic Test Leads
$123.45
$123.45Add to cart
EsiTest #180 LOADpro Dynamic Test Leads
LOADpro finds these problems FAST: High Corrosive Resistance Shorts to Ground Open Circuits LOADpro Test Leads load the circuit to see if
